Page 2 of 3

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 8:20 am
by Steve@Tasca
o2designs wrote:We were forced to do that Steve....messing with my Epic pic thread is retarded and immature... :?
Oh, right, but using candid pics of a person in a sig is the grown up response? :? At least we're past all that nonsense. :D

Anyways, since Kyle didn't mention the reason for this thread it was because he IM'ed me a pic on my cell phone and I couldn't tell what it was.

This is what came through my phone,
Image

I showed the wife and asked her what she though it was and she said, "I don't know, UFO".

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 10:15 am
by Redlineracer12
It's obviously a riced out Skylark... I'm surprised you didn't see that Steve 8)

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 10:18 am
by focinite
well arnt you a inventive little shit?!!?!? my question is how many tabs you bust getting into the actual switch? and pappy you could only hope yer IATs looked that good :lol: joking aside and well off topic, pappy didnt that meth injection take care of the air temps or is that easy bake oven still pumping hot air? 8)

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 10:25 am
by Steve@Tasca
Redlineracer12 wrote:It's obviously a riced out Skylark... I'm surprised you didn't see that Steve 8)
$2.14 white girl 8)

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 11:18 am
by o2designs
focinite wrote:well arnt you a inventive little shit?!!?!? my question is how many tabs you bust getting into the actual switch? and pappy you could only hope yer IATs looked that good :lol: joking aside and well off topic, pappy didnt that meth injection take care of the air temps or is that easy bake oven still pumping hot air? 8)
ACtually, the first one I took apart I did break. But I've got a technique to getting them apart without breaking them now. I had 2 spares from when I was going to put pwr windows into Chromie, so I used one of those. All good to go.

And his Easy Bake was tuned without the WMI. The car did'nt have any problems with the temps or IATs. So he does'nt need it.

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 11:24 am
by Steve@Tasca
o2designs wrote:
focinite wrote:well arnt you a inventive little shit?!!?!? my question is how many tabs you bust getting into the actual switch? and pappy you could only hope yer IATs looked that good :lol: joking aside and well off topic, pappy didnt that meth injection take care of the air temps or is that easy bake oven still pumping hot air? 8)
And his Easy Bake was tuned without the WMI. The car did'nt have any problems with the temps or IATs. So he does'nt need it.
I'm pretty sure Pappys tune is safe as is, he beats the living piss out of that car non-stop and it hasn't blown up yet.

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 2:16 pm
by Monkey Gein
i started to do that in my 01 sedan.

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 3:35 pm
by o2designs
Monkey Gein wrote:i started to do that in my 01 sedan.
Beat the piss out of it?

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 3:42 pm
by HotRodWagon
o2designs wrote:
Monkey Gein wrote:i started to do that in my 01 sedan.
Beat the piss out of it?
Image

Re: CAST YOUR VOTE!!!

Posted: Tue Dec 02, 2008 10:18 pm
by focinite
soo does the green(damm "n" key popped off) led come out and what you glue the white one in? i have been wanting to do blue or violet for my hvac id figure it would be simular. 8)

Re: CAST YOUR VOTE!!!

Posted: Wed Dec 03, 2008 8:58 am
by Monkey Gein
o2designs wrote:
Monkey Gein wrote:i started to do that in my 01 sedan.
Beat the piss out of it?
no, the switch lights yo. i was doing blue. i only did the back ones

Re: CAST YOUR VOTE!!!

Posted: Wed Dec 03, 2008 9:53 am
by o2designs
focinite wrote:soo does the green(damm "n" key popped off) led come out and what you glue the white one in? i have been wanting to do blue or violet for my hvac id figure it would be simular. 8)
Not quite that easy. You need to unsolder the old ones and solder the new ones in. And when messing with the HVAC, its not so easy...that gets alittle more work involved...but the window switches were easy. Just unsolder and solder...
I already did the other car in blue...
Image
And when I had Rattles, I had red in there...
Image
Still working on this at the time, the HVAC were still green...
Image
Image

And I have the wagon all converted to white LEDs. This was the last two pieces to do. And I found the clips I need from the spare switches I had, so I'll be able to hook up the Door Lock LEDs as well later on,, when it warms up...

Re: CAST YOUR VOTE!!!

Posted: Wed Dec 03, 2008 10:16 am
by Patalrob
Good work Kyle!

This gives me something else to do in my time off :lol:

Re: CAST YOUR VOTE!!!

Posted: Wed Dec 03, 2008 12:00 pm
by focinite
now for the svt gauge cluster i wounder if that would work as well, im tiring of the green. i know thw svt guage has a different style of light in it but still im not liking the green.

Re: CAST YOUR VOTE!!!

Posted: Wed Dec 03, 2008 12:02 pm
by o2designs
I've never owned a SVT, so I don't know how hard it would be to change...Typically most SVT owners like that drab green color...But I agree, Green is ugly in a car...VW FTW