Page 1 of 2

Sparco pista!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted: Thu Sep 16, 2010 1:10 pm
by CleanZX3
$650....These are a only a few thousand miles old.... :(

17x7 with 215/45/17 sumitomo HTR Z III's, wheel locks, and lugs.

Re: Duratec parts, and focus wheels

Posted: Thu Sep 16, 2010 8:09 pm
by ThatOneBigKid
Do you have any pics of the wheels? Might be interested...

Re: Duratec parts, and focus wheels

Posted: Thu Sep 16, 2010 8:12 pm
by CleanZX3
Image
Image
Image

Forgot to add, the tires have tirerack's hazard warranty.

Re: Duratec parts, and focus wheels

Posted: Fri Sep 17, 2010 8:00 am
by Redlineracer12
7" wide and 42mm offset on them like on TireRack? Lugs included? :)

Re: Duratec parts, and focus wheels

Posted: Fri Sep 17, 2010 12:11 pm
by CleanZX3
Redlineracer12 wrote:7" wide and 42mm offset on them like on TireRack? Lugs included? :)

Yes!

Re: Duratec parts, and focus wheels

Posted: Fri Sep 17, 2010 1:49 pm
by ZX2_racer
Did you use Valve Springs on the cams? These cams?
http://cranecams.com/?show=browseParts& ... r=224-0010

Re: Duratec parts, and focus wheels

Posted: Fri Sep 17, 2010 5:10 pm
by CleanZX3
ZX2_racer wrote:Did you use Valve Springs on the cams? These cams?
http://cranecams.com/?show=browseParts& ... r=224-0010
I didn't use valve springs, and yeah those are the cams.

Re: Duratec parts, and focus wheels

Posted: Sat Sep 18, 2010 12:32 pm
by ZX2_racer
Dibs on the cams. PM'd you.

Re: Duratec parts, and focus wheels

Posted: Sat Sep 18, 2010 3:09 pm
by jasoninmn
pm sent on CAI

Re: Duratec parts, and focus wheels

Posted: Sun Sep 19, 2010 4:45 pm
by CleanZX3
Bumpage.....


Also, the water to oil cooler is the same as the cosworth unit... But wayyyyy less expensive. It comes with the hoses and everything.


Cams pending to some hot guy I met at the bar. :lol:


I'm going to put this stuff up on the big focus boards tomorrow........

Re: Duratec parts, and focus wheels

Posted: Sun Sep 19, 2010 7:32 pm
by Patalrob
Pictures on the Oil cooler please.

Re: Duratec parts, and focus wheels

Posted: Sun Sep 19, 2010 7:47 pm
by ZX2_racer
Thanks for showing me another great night. Next time, I'll do you.

Decided I'd wait to put the cams in until I got everything ready. They will be in next spring. :)

Re: Duratec parts, and focus wheels

Posted: Mon Sep 20, 2010 1:49 pm
by CleanZX3
Image
Image
Image

Re: Sparco pista!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted: Fri Oct 01, 2010 2:16 pm
by CleanZX3
Bump.. Buy my wheels. 650 bucks.......Its a good deal.

Re: Sparco pista!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted: Fri Oct 01, 2010 5:00 pm
by closetfordfan
Btw, a set of 4 only cost $516 on Tire Rack. Good luck with your sale. :mrgreen: