Body kit

[STtuner05]

dont forget about the Steeda body kit. it's a bit less extreme. clean lines and such. It's one of my favorites.

steeda isnt a bodykit, its a lip kit, or as they call it a "ground effects" kit, i want a little more then that.

[o2designs]

This is the F2. Just think of it withought the fender flares tho, unless you do the whole widebody kit...

[STtuner05]

that looks alot like the stock rear bumper, just the difuser at the bottom is changed out (i would really like to know what kit they used for the exhaust, i would like duals on mine!) plus if the kit comes cut out for duals that is going to look gay when they arnt filled!

[focinite]

that looks alot like the stock rear bumper, just the difuser at the bottom is changed out (i would really like to know what kit they used for the exhaust, i would like duals on mine!) plus if the kit comes cut out for duals that is going to look gay when they arnt filled!

jegs has a nice inexpensive dual kit modeled off a generic flow master muff. sounds great, looks ok. and yes it would look gay with a open hole ...... or it could be for a high power reverse lamp!

[STtuner05]

that looks alot like the stock rear bumper, just the difuser at the bottom is changed out (i would really like to know what kit they used for the exhaust, i would like duals on mine!) plus if the kit comes cut out for duals that is going to look gay when they arnt filled!

jegs has a nice inexpensive dual kit modeled off a generic flow master muff. sounds great, looks ok. and yes it would look gay with a open hole ...... or it could be for a high power reverse lamp!

jegs has one? i have never heard of anyone useing this system. im still kinda wondering what they used on the sema focus. and no i dont need a highpower reverse lamp

[focinite]

most dont assume jegs would catter to the slocus family. but there are some parts in there. i have installed one and like i said its a flow master nock off, its aluminized steel( keeps cost down) and has polished stainles tips, sounds tits!!! looks like...... eeehhh , but you can cut the tips and add any, its aluninized steel so it welds so smooth!!!! i think they ask $180.oo or sumthin.

[STtuner05]

hmm thanks ill have to check it out

[o2designs]

Huh? That is the RS rear end molded to fit a 05 and newwer sedan. To me, its way different then the SVT/ST rear. Its the F2 car, I'm pretty sure its a inhouse one off exhuast. Rob(on focaljet.com-formely known as Tribal) has a yellow ZX3 he bought from F2, that car as well has a one off dual tipped exaust.

And the bumper only comes with one cutout for the exhaust on the driver side. The other side has markings underneath of were to cut, but you don't have to. I have the same rear on my car.

[focinite]

huh.. i have been lookin at the f2 stuff, i like the wide body. i just need to do a few more side jobs!!!! i need my stern meshes for that http://www.1goldenapple.com/brand_detai ... sh&ino=157 and the wide kit from f2 would be tooo sexy in black

[STtuner05]

Huh? That is the RS rear end molded to fit a 05 and newwer sedan. To me, its way different then the SVT/ST rear. Its the F2 car, I'm pretty sure its a inhouse one off exhuast. Rob(on focaljet.com-formely known as Tribal) has a yellow ZX3 he bought from F2, that car as well has a one off dual tipped exaust.

And the bumper only comes with one cutout for the exhaust on the driver side. The other side has markings underneath of were to cut, but you don't have to. I have the same rear on my car.

did yours come with the corner lights at the bottom? cuz the f2 car that is pictured doesnt have them

[o2designs]

No, I put them in. It took a year to acquire all the shit to properly do it right.

[STtuner05]

idk i would still like the look of the duals

[o2designs]

You can always add the duals later. You just need to notch teh bumper. There are marks underneath were you need to cut it out.