Who can guess where I was
More pictars
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
Went cruising yesterday and snapped a few. I'll post a couple more tonight most likely
Who can guess where I was
Who can guess where I was
3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
Pappy
- have you seen my boxers?
- Posts: 4072
- Joined: Tue Jun 21, 2005 12:11 pm
- Car: 09 Mustang GT, 14 Focus
- Location: WI
First two, overlook in OakPark Heights/ Still-H2o Border.
Last one still-h2o lift bridge yo.
I win
Pics are sick tony.
Last one still-h2o lift bridge yo.
I win
Pics are sick tony.
Prestige WorldWide The First Word In Entertainment
______________Boats and Ho's!_____________
______________Boats and Ho's!_____________
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
Bingo Man it was crowded down there yesterday.
Man it was crowded down there yesterday.3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
Not yet.o2designs wrote:Have you ever been pulled over with that plate there?
One pop can roughly. Oh, and the left side skirt is roughly the same.o2designs wrote:How much ground clearence is under the right side skirt?
3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
o2designs
- Making skinny jeans look baggy since 2009
- Posts: 8253
- Joined: Sun Feb 13, 2005 3:27 pm
- Car: Bone Stock Focuseses
- Location: Rochester
Is the front the same height as well? I've always wondered...
Do you use a short shifter? And if so, does it retain the reverse lockout?
Do you use a short shifter? And if so, does it retain the reverse lockout?
Pants too tight, wheels so bright!
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
Front of the skirt is slightly lower than the rear. The pop can (mountain dew in case you were wondering) fits with a slight air gap under the rear of the skirt, whereas in the front it doesn't quite slide under.
I use a Focus Steeda short throw. It retains reverse lockout but breaks shift cables
I use a Focus Steeda short throw. It retains reverse lockout but breaks shift cables
3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
o2designs
- Making skinny jeans look baggy since 2009
- Posts: 8253
- Joined: Sun Feb 13, 2005 3:27 pm
- Car: Bone Stock Focuseses
- Location: Rochester
Oh nice...its just slides in without modifing it?
For your exhaust, does the y-pipe bolt togher after the rear subframe, or is it one piece?
For your exhaust, does the y-pipe bolt togher after the rear subframe, or is it one piece?
Pants too tight, wheels so bright!
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
Yup slides in, I had to lift the tower in the car just a bit so the longer bottom half of the shifter had clearance. I did it with a piece of plexi-glass I cut out to fit the size of the tower.
The exhaust is one piece after the catalytic converter. The y in the rear is welded in.
The exhaust is one piece after the catalytic converter. The y in the rear is welded in.
3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
Redlineracer12
- I is speshul
- Posts: 3305
- Joined: Tue May 02, 2006 7:36 am
- Car: 00 Contour SVT
- Location: IGH
- Contact:
25% window tint.
Psssh K&N son, added like 50+ whp too.
Psssh K&N son, added like 50+ whp too.
3 Fords, 1 Mercury, 1 Honda, 1 Yamaha
-
Patalrob
- Borlatap
- Posts: 3559
- Joined: Sat Dec 15, 2007 11:08 am
- Car: 06 Wagon, 02 SVTF, 00 ZX3
- Location: Aitkin, MN
Nice Pix! Where is that over look in OPH? I have been at the MCF for 3 weeks now doing some work there again.
00 ZX3 "RattleTrap"
06 Wagon Doggy mover
95 Chevy Silverado Tow rig for lawn mowers
02 SVTF ...........
06 Wagon Doggy mover
95 Chevy Silverado Tow rig for lawn mowers
02 SVTF ...........